The M-9000 Matrix Mixer is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs. 9000 series modules as well as existing 900 series input modules can be used. The most appropriate modules can be selected depending on applications. It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer. Settings data can be stored inside the unit and called up using the keys on the front panel.
For balanced, low impedance mics. Compressor function prevents overload and distortion. Choose from two connector types: female XLR or removable terminal block.
The M-61F is a microphone input module to be used in conjunction with the 900 series components and other TOA's equipment. It has a transformer balanced microphone input with female XLR type connector, phantom power supply function, compressor function and threshold and tone controls.
- For Balanced, Low Impedance Microphones.
- High and Low Cut Fileters for tone control, 4.2k Hz and 330 Hz, 6 dB/octave.
- Phantom Power, +22V DC for condenser-type microphones. Activate by default, cut Jumper J1 to disable.
- Responds To Mute Bus Activation, via Mute SEND module or switch-closure.
- Responds To Both Mute Bus #1 And Mute Bus #2 By Default (cut jumper(s) to disconnect individual mute bus).
- Two Mute Response Modes (cut jumpers to configure):
1. Normally-ON - turns OFF during mute activation (most common)
2. Normally-OFF - turns ON during mute activation (functions as an ON/OFF switch, useful for zone-paging microphones in multi-amplifier systems)
- Connector: removable terminal block
- For Balanced, Low Impedance Microphones.
- High and Low Cut Fileters for tone control, 4.2k Hz and 330 Hz, 6 dB/octave.
- Phantom Power, +22V DC for condenser-type microphones. Activate by default, cut Jumper J1 to disable.
- Responds To Mute Bus Activation, via Mute SEND module or switch-closure.
- Responds To Both Mute Bus #1 And Mute Bus #2 By Default (cut jumper(s) to disconnect individual mute bus).
- Two Mute Response Modes (cut jumpers to configure):
1. Normally-ON - turns OFF during mute activation (most common)
2. Normally-OFF - turns ON during mute activation (functions as an ON/OFF switch, useful for zone-paging microphones in multi-amplifier systems)
- Connector: removable terminal block
The M-110 is a stereo mixer mountable in a standard 19" rack (4-unit size), and realizes easy operation and visibility thanks to the slide faders (100 mm) for IN/OUT volume controls. It provides three bus lines (monaural×2 and stereo×1) allowing the selection of employed a bus line for each input, and output signal may not be distorted for excessive input as the limitter for monaural inputs is built in the unit. Easy connection can be made from the rear or upper side as the connector section of the rear panel can be moved to the upper side.
The TOA M-03P is a 900 Series Module for use with the TOA 900 Series Mixer/Amplifier.
The TOA M-03P is designed for use with Unbalanced, High Impedance microphones and uses a 1/4" Phone Jack connector.
The M-01P from TOA Electronics is a microphone input module for use with 900 series amplifiers. It is designed to be used with unbalanced, low-impedance microphones and offers phantom power, adjustable gain, and high and low-cut filters. The M-01P has a 1/4" (6.3 mm) phone jack connector.
The M-01M is a microphone input module to be used in conjunction with the 900 series components and other TOA's equipment. It has a transformer balanced microphone input with male XLR type connector, phantom power supply function, and gain and tone controls.
The TOA M-01 series modules are designed for balanced, low impedance microphones. Choose from four connector types: female XLR, male XLR, 1/4” phone jack or removable terminal block. Microphone input module, balanced, 200 W, Lo/Hi-cut filters, This TOA M-01F comes with a female XLR connector. Contact AVsuperstore for more information.
The JP-039-20 EC is a junction panel connects and controls AC power lines. It may also be used as a terminal board for speaker lines of cabinet rack type sound system.
Photo
The JP-028B is a junction panel connects and controls AC power lines. It may also be used as a terminal board for speaker lines of cabinet rack type sound system.
Photo
The BGM TOA JP-029B Q220 is a junction panel connects and controls AC power lines. It may also be used as a terminal board for speaker lines of cabinet rack type sound system.
Photo
The JP-028B is a junction panel connects and controls AC power lines. It may also be used as a terminal board for speaker lines of cabinet rack type sound system.
Photo
Ampli công suất 2 kênh 300W Toa IP-600D CE
- Output Power 600W @ 4Ω Stereo (per channel)
400W @ 8Ω Stereo (per channel)
1200W @ 4Ω Bridged-Mono
- Damping Factor Not Specified by Manufacturer
- Input Sensitivity +5.3dB (1.42V) +/-0.5dB
- Input Impedance 10 kΩ, Electronically Balanced
- Gain 32 dB
- Frequency Response 20 Hz - 20 kHz(+0 dB, -0.5 dB)
- Signal-to-Noise Ratio 112dB @ 26dB Gain
107dB @ 32dB Max. Gain
- Total Harmonic Distortion (THD) 0.01% (8 Ω, 1kHz)
0.1% (8 Ω, 20Hz - 20kHz)
- Input Connections 2 x 1/4" TRS Phone (Balanced)
2 x Screw Terminal Barrier Strips (Balanced)
- Output Connectors 1 x Ch1/Ch2 Solderless Screw Terminal
- Controls Front Panel 2 x Rotary Attenuator Controls
1 x Power Switch
- Controls (Rear) 2 x On/Off VR Control Switches
1 x 3-way Stereo/Parallel/Bridged-Mono Mode Switch
- Indicators 1 x Green Power LED
2 x Green Signal LEDs
2 x Red Peak LEDs
2 x Red Protect LEDs
2 x Yellow VR Bypass LEDs
- Camera Resolution Variable Speed, Fan-Cooled, Forced Air
Tài khoản
Giỏ hàng (0)
Hướng dẫn
Liên hệ
